working at home for a while now.
Oct. 27th, 2010 08:23 pmI'm making some panels for two of my painter customers. See, there are several almost finished ones leaning against the dresser. Look at all my pony clamps. On top of that dresser are my big wooden screw clamps. I put so many of the clamps around the edge to hold the glue to dry. They're so close together so that the wood doesn't dimple along the edge like a pie crust. The moisture in the glue makes the wood expand, so it has to be held all along the length.
Later on, I make ribs to go across the back of the panel to keep it flat. The sides and ribs are called the panel's "cradling". The thin panels are like big membranes and expand and contract with changes in the weather. The ribs prevent this to a great extent and keep the panels flat. Here are calculations for how far apart to put the ribs for the differing sized panels I am making. I have a certain range (about 12" is ideal) that I use so they are not too far apart, or too close together. The rectangles drawn at the top of the paper are a cutting schedule for the sizes I have to make - for cutting out of the plywood sheets. I use that small hand saw for this as the table saw is too rough and tears out splinters of the veneer all along the edge on the crosscuts.

Later on, I make ribs to go across the back of the panel to keep it flat. The sides and ribs are called the panel's "cradling". The thin panels are like big membranes and expand and contract with changes in the weather. The ribs prevent this to a great extent and keep the panels flat. Here are calculations for how far apart to put the ribs for the differing sized panels I am making. I have a certain range (about 12" is ideal) that I use so they are not too far apart, or too close together. The rectangles drawn at the top of the paper are a cutting schedule for the sizes I have to make - for cutting out of the plywood sheets. I use that small hand saw for this as the table saw is too rough and tears out splinters of the veneer all along the edge on the crosscuts.

(no subject)
Date: 2010-10-29 08:58 pm (UTC)Now days, oil paintings and tempera paintings seem to last pretty well, but show deterioration, fading, and abrasion, probably mostly because they are made mostly with organic materials. The pigments are hurt by ultra violet light and air pollution, not to mention accidents, insects, mildew and overzealous restorers. Canvas can tear easily, while wood can warp and crack or get attacked by molds or insects. Fire and war losses are likely over the very long term. Maybe acrylic paintings will prove to be more durable than oils and tempera. Time will tell.
I think maybe canvas has the best chance of survival, because it can be rolled up and hidden away. Probably acrylic paints are beter than oils for longevity because they are flexible plastic, while oil gets more and more brittle over the centuries... but maybe acrylic will too. We don't know yet. I think I like painting on the panels I make with acrylic best, maybe with oils too. I haven't used oil for a long time. Large paintings like bigger than 4x5' I probably would prefer canvas.